It is most efficient to use gravity for transport of basic materials and products. For this reason it is advisable to install the whole plant in a building with several floors.
The main storage of the seed can be placed outside or inside the oil mill building. Conveying machinery transports the seed up to the buffer silo above the press. There the seed will be warmed up to room temperature before dropping into the press by garvity. The buffer silo should be the size of the daily processing capacity. A level sensor controls the filling.
It is important to clean the seed from stones, possible metal prices and plant parts. This provides a more constant oil quality and reduces the risk of damaging the press. The contamination should be under 2%. A sieve is used to remove stones and plant parts, and a magnetic separator removes possible meral parts. For cleaning rape seed, a sieve with a mesh size between 2.2 to 2.5mm is recommended. The seed is prewarmed to about 20℃ by a special unit or by a heat exchanger that makes use of the heat from the warm press cake. Pre-heating the seed to over 20 ℃ has no addition benefit.
For economic reasons, automatic operation of the oil mill is onlu recommended for capacities over 500kg/h for rape seed and over 700kg/h for sunflower seed. Hereby the filtering process should follow immediately the pressing (e.g. with a self-cleaning filter). A buffer storage tank directly after pressing with homogenisation unit is recommended if using a semiautomatic or automatic operating filter, in order to have the particles from the raw oil distributed. The size of the tank should be 1 to 2 times the daily capacities.
For automatic operation of the whole process it is necessary to control the following parameters: ►throughput-control on the press cake outlet ►temperature control for nozzle and press cake tank ►filling-level of clean oil tank and press cake tank
Contant Us
Phone: +86-371-5677 1823TEL: +86 158 3826 3507
Skype:sophia.zang1
Email: oilmachine@doingoilmachine.com
Service Online Get price
News
Edible Oil Extraction Plant Products
Pretreatment/Press Process
Batch edible oil refinery
Vegetable oil refinery process
Vegetable oil refining methods
Cooking oil refining process introduction
Automatic corn germ oil refining process
Sunflower oil refining machine technology
What’s the process of Edible oil Refining?
Oil Extraction Process
Process of soybean oil extraction
DTDC---Desolventizer Toaster Dryer and Cooler in solvent extraction of vegetable oil
Vegetable oil solvent extraction machinery introduction
Corn germ oil solvent extraction machine
Oil solvent extraction plant introduction
Soya bean oil solvent extraction plant
Peanut/groundnut oil extraction process
Solvent extraction process
Sunflower oil extraction machine
Oil Refining Process
Peanut/groundnut oil press production line
Big capacity oil press machine
Palm kernel oil expeller
Oilseed pretreatment & pressing machines introduction
Screw oil press machine
Small scale palm oil extraction machine
Sunflower screw oil press machine
Small scale oil mill plant
New-type hydraulic Oil Press
Winterization/fractionation/dewaxing
Introduction of vegetable oil dewaxing/winterising
Dewaxing of sunflower oil
Cooking corn germ oil dewaxing machine
Maturing tank/maturator
Heat discharging filter - filter mainly used in large scale process
Crystallizer/crystallizing tank
Oil Mill Solutions
Oil fractionation equipment
Stripping tower
Introduction of vegetable oil dewaxing/winterising
Dewaxing of sunflower oil
Cooking corn germ oil dewaxing machine
News/General advica for a complete oil mill
General advica for a complete oil mill
The main storage of the seed can be placed outside or inside the oil mill building. Conveying machinery transports the seed up to the buffer silo above the press. There the seed will be warmed up to room temperature before dropping into the press by garvity. The buffer silo should be the size of the daily processing capacity. A level sensor controls the filling.
It is important to clean the seed from stones, possible metal prices and plant parts. This provides a more constant oil quality and reduces the risk of damaging the press. The contamination should be under 2%. A sieve is used to remove stones and plant parts, and a magnetic separator removes possible meral parts. For cleaning rape seed, a sieve with a mesh size between 2.2 to 2.5mm is recommended. The seed is prewarmed to about 20℃ by a special unit or by a heat exchanger that makes use of the heat from the warm press cake. Pre-heating the seed to over 20 ℃ has no addition benefit.
For economic reasons, automatic operation of the oil mill is onlu recommended for capacities over 500kg/h for rape seed and over 700kg/h for sunflower seed. Hereby the filtering process should follow immediately the pressing (e.g. with a self-cleaning filter). A buffer storage tank directly after pressing with homogenisation unit is recommended if using a semiautomatic or automatic operating filter, in order to have the particles from the raw oil distributed. The size of the tank should be 1 to 2 times the daily capacities.
For automatic operation of the whole process it is necessary to control the following parameters:
►throughput-control on the press cake outlet
►temperature control for nozzle and press cake tank
►filling-level of clean oil tank and press cake tank
Leave A Message